top of page

The Key Benefits Of The Continous Tyre Pyrolysis Plant

The Continous Tyre Pyrolysis Plant is one of the best ways to deal with waste such as oil sludge, medical waste, rubber, plastic, and waste tyres. These plants are created with several different benefits.

To start with, the continuous pyrolysis plants include a handling capacity which is large of 20-24t/d, making these plants the optimal solution for that large factories or perhaps for businesses looking to get rid of huge amounts of waste.

This plant comes built with a feeder that may be automatic. This supplies a method to automatically feed the waste tyres in the reactor, which drastically reduces costs and manpower. The Continous Waste Tyre Pyrolysis Plant also features a shredder machine. This machine crushes the waste tyres into smaller items of around 40mm, which assists to maximize the efficiency of pyrolysis.

Continous Tyre Pyrolysis Plant

These plants can also be designed to run continuously for 24-hours each day without having to stop. This machine has the capacity to discharge slags and feed materials in to the reactor simultaneously. If compared to the traditional varieties of pyrolysis plants, the continuous plants help to save on fuels and time.

The most important good thing about the continuous pyrolysis plant is related to the reactor which can be not rotary, but rather stable. This assists using a faster and more even heating in the reactor: https://kingtigergroup.com/fully-automatic-waste-tyre-pyrolysis-plant/.

Operation Description In The Continous Tyre Pyrolysis Plant:

1.Pre-Treatment

Just before the pyrolysis process may start, the waste tyres have to undergo a pre-treatment phase. Including the shredder machine that breaks down the waste tyres into smaller bits of around 30 to 55mm.

2.Feeding The Raw Materials

Right after the pre-treatment phase, the waste matter are automatically fed into the reactor. The inlet door will then be sealed tightly to stop any gas leakages.

3.Pyrolysis

The reactor is first heated employing a fuel source for example wood, coal, fuel gas, or charcoal. The reactor gradually gets hot and when the temperature rises to 250℃, the burning process produces an oil gas.

4.Condensing

The oil gas produced inside of the reactor will then be sent to the condensing-system, the location where the gas is changed into liquid oil.

5.Recovery Of Waste Gas

The gas that is not going to liquefy under standard pressure is going to be sent through a safety device into the combustion-system. This recycled gas is going to be accustomed to provide you with the fuel the reactor, which saves on energy through the tyre pyrolysis process.

6.Discharge

The steel wire and carbon black is going to be automatically discharged, as well as any waste matter are sent into the reactor.

Final Products From The Continous Tyre Pyrolysis Plant:

•Tyre Oil

This oil can be used widely as an industrial fuel material. The oil can be further refined to gasoline or diesel, that is utilized in low-speed engines like loading machines, road rollers, and digging machines.

•Carbon Black

The carbon black can be used frequently to put together the bricks made from clay. It is additionally made into briquettes or pellets, for burning.

•Steel Wire

The reclaimed steel wire discharged from the continuous tyre pyrolysis plant is recycled again and used to produce iron and steel rods.


RECENT POSTS:
SEARCH BY TAGS:
No tags yet.
bottom of page